While other parts of the house sustained heat, smoke and water damage. The burn patterns were consistent with that of a fire which originated from a location near the windows, where a computer table used to be. The burned remains of a portable socket outlet was recovered from the determined Area of Fire Origin Picture on the show According to the occupant, this portable socket outlet was brought over from overseas. The cause of fire was determined to be accidental and of electrical origin at the portable socket outletYou own a multi-family, and that makes you responsible for many lives. This responsibility needs to be taken seriously, especially regarding fire code and fire safety. It is time to rely on the experts. The Singapore Civil Defence Force analyzes fire events for trends and patterns, allowing professionals to try to prevent future similar incidents from happening.
Scenario
Roderico lives in a three-story terrace apartment house. One day he went to work following his usual routine. At the end of his shift, he returned home, planning to make his and his fiance’s dinner. While cooking, the power went off (tripped) due to the number of appliances he used in the kitchen.
After resetting the power, he dined with his lady, and they sat down to enjoy a quiet evening at home. Suddenly, he noticed smoke coming out of the second-story level of the three-story apartment, and it quickly became apparent that there was a fire!
Causes of
Fire Origination
Fire damage was most severe in the master bedroom, while other areas of the second-story apartment sustained heat, smoke, and water damage. Upon inspection of the master bedroom, the burn patterns near the windows, where the computer table had been, were consistent with a first starting near a portable socket outlet recovered from the suspected area of origin.
After speaking with Roderico, it was ascertained that the portable socket outlet had been purchased from an overseas vendor. The result was a determination of accidental fire, of electrical origin, specifically at the location of the portable socket outlet.
Lessons Learned
When tragic events like this occur, there is an analysis of trends that lead to change. A professional fire inspection can help you ensure that your apartment building is as safe as can be given their analysis at that time.
Never overload electrical outlets and circuits
Overloading an outlet or circuit can cause overheating and damage your wiring, leading to a fire. If you have more appliances plugged into one outlet than it’s rated for, get an electrician to install an outlet with a higher capacity.
Don’t use extension cords as permanent wiring solutions
Extension cords are meant as temporary solutions — they should never be used as permanent wiring solutions because they can overheat, leading to fires. Use only UL-listed extension cords and ensure adequate insulation, so they don’t overheat when used for too long or in high-traffic areas.
Check the condition of the wiring regularly
Ensure that any wires that aren’t in use are tightly wrapped and protected from heat sources. Check for exposed wires, loose connections, and faulty wiring to avoid potential electrical fires.
Avoid running wires under carpets or mats
This is one of the most common causes of fires in homes. If you have a cord plugged into an outlet, make sure it isn’t running under rugs or mats where it could be damaged or exposed to moisture.
Use plugs only with Singapore Safety Mark
Many people don’t realize that many of the plugs in their homes aren’t safe for use with Singapore electricity. If you plug one of these into an outlet, you risk getting an electric shock or starting a fire — not something anyone wants! In Singapore, you should only use plugs with the Singapore Safety Mark.
Main Webpage
Blog Page
Youtube: No My Problem meet Competent Electrician
Facebook Fan Page
Facebook Post
